Pick-Up Coil (w/o ESC)
- Disconnect Red and White wires of pick-up coil from ignitor terminals. Measure pick-up coil resistance. See PICK-UP COIL RESISTANCE table. If resistance is not within specification, replace pick-up coil in distributor.
- If resistance is within specification, check pick-up coil air gap and adjust as necessary. See PICK-UP COIL AIR GAP table. Replace distributor if correct specification cannot be obtained.
PICK-UP COIL AIR GAP
| Application |
Clearance In. (mm) |
| All Models |
.008-.016 (.20-.40) |
PICK-UP COIL RESISTANCE - Ohms @ 68°F (20°C)
| Application |
Ohms |
| Metro |
140-180 |