Ignition Coil Resistance
- Remove distributor cap, rotor and dust cover. Using ohmmeter, check resistance between primary terminals of coil. See Figure and Fig 1 .
- Check secondary resistance between coil secondary terminal and primary positive terminal. Replace coil if readings are not within specifications. See IGNITION COIL RESISTANCE table.
HIGH TENSION WIRE RESISTANCE
| Application | Ohms Per Foot |
|---|---|
| All Models | 3000-6500 |
IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)
| Application | Primary | Secondary |
|---|---|---|
| Prizm | 1.30-1.60 | 10,400-14,000 |