Oil Burner (GEO0370AP)

Publication date: 1995-03-01
Reference number: GEO0370AP

OIL BURNER

TECHNICAL INFORMATION TIP

Reference Number(s): GEO0370AP, Date of Issue: March 1995

OIL BURNER

YEAR(S): 1990

MANUFACTURER: Geo

MODEL(S): Tracker

DATE OF ISSUE: March 1995

ISSUE & TIP

We recently repaired a 1990 GEO Tracker that was burning about four quarts of oil every 200 miles. After removing the valve cover for inspection, I noticed the two rear Phillips head screws for rocker shaft alignment were missing. These screws lead right into the oil gallery and were causing a massive internal oil leak.

At freeway speeds, the valve cover was filling up with oil. The extra oil was then sucked into the PCV system and burned in the combustion chambers. We found the two missing screws laying in the head, reinstalled them with thread locker, and had no more problems.

Courtesy of Import Service Magazine

with thanks to:

Glen Hoisington

Richie's Automotive

Colorado Springs, Colorado

REFERENCE NUMBER

GEO0370AP

NOTE: This information has been obtained from sources generally believed to be reliable. Use your own judgment before relying on this data. Neither the suppliers of these Technical Information Tips, nor lemon-25 Repair Information Company, LLC, guarantees or assumes responsibility for data accuracy or completeness, nor is liability assumed by the suppliers of these Technical Information Tips or lemon-25 Repair Information Company, LLC, for any claims or damages resulting from the use of this information.