Park/Neutral Switch
Disconnect park/neutral switch. Using ohmmeter, check for continuity between specified wires with gearshift in proper location. See PARK/NEUTRAL SWITCH CONTINUITY . Continuity should exist as listed.
NOTE:
On Metro A/T models, ECM receives gear position signals from A/T module. The park/neutral switch provides gear position signal to the A/T module.
PARK/NEUTRAL SWITCH CONTINUITY
| Gear Position | Wire Colors |
|---|---|
| Park | Black, Black/Red & Black/Yellow |
| Reverse | Red & Yellow |
| Neutral | Black, Black/Red & Black/Yellow |
| Drive | Black |
| 2nd Gear | Black & Green |
| Low | Black & Green/Blue |