LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1995 >> Prizm Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> Shift Lock Control Module >> Removal (Prizm)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal (Prizm)

  1. Disconnect negative battery cable. Move gear selector lever to "L" position. Remove center console trim bezel from center console. Disconnect rear defogger switch, hazard switch and cigar lighter harness connectors at rear of center console trim bezel.
  2. Remove center trim bezel and center console tray. Remove radio from vehicle. Remove rear console. Return gear selector lever to "P" position. Remove selector trim bezel from center console. Remove right-side kick panel.
  3. Remove glove box. Remove 2 cover plates from knee bolster. Remove hood release cable from hood latch release lever and bracket. Remove knee bolster from instrument panel. Disconnect harness connector from ABS Data Link Connector (DLC) (if equipped). Remove center console.
  4. Remove illumination light from shift indicator. Remove 4 screws from shift indicator. Position shift indicator to allow access to shift lock control module. Disconnect harness connectors from shift lock solenoid/shift lock control switch assembly and shift lock control module. Remove shift lock control module from gear selector lever.
scientia non olet · About LEMON Manuals