LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Prizm Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Starter Relay Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Relay Test

  1. Relay is located in relay block cassette. Relay block cassette is located behind left kick panel attached to junction block 1. Remove relay. Using ohmmeter, check continuity between relay terminals No. 1 (White/Black wire) and No. 2 (Black Wire). If continuity is present, go to next step. If continuity is not present, replace relay.
  2. Using ohmmeter, check continuity between terminals No. 3 (Black wire) and No. 5 (White wire). If continuity is not present, go to next step. If continuity is present, replace relay.
  3. Apply battery voltage to terminal No. 2 and ground terminal No. 1. Using ohmmeter, check continuity between terminals No. 3 and 5. Continuity should be present. If continuity is not present, replace relay.
scientia non olet · About LEMON Manuals