Engine Controls - System/Component Tests 1.6 & 1.8L: Introduction
NOTE:
Testing individual components does not isolate shorts or opens. Unless stated otherwise in test procedure, perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance. Use ohmmeter to isolate wiring harness shorts or opens.
Before testing separate components or systems, perform procedures in BASIC TESTING article. Since many computer-controlled and monitored components will set a Diagnostic Trouble Code (DTC) if they malfunction, it is also recommended that self-diagnostics be performed. See TESTS W/CODES article.