LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1996 >> Tracker Base, 4D Utility, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 1.6L >> Relays & Solenoids >> Relays >> Main Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Relay

  1. Disconnect negative battery cable. Remove main relay. Main relay is located under instrument panel attached to side of heater case. Using an ohmmeter, measure resistance between terminals No. 2 and 4. See Figure .
  2. Continuity should not be present. If continuity is present, replace relay. Measure resistance between terminals No. 1 and 3. Resistance should be 61-75 ohms. If resistance is not as specified, replace relay. Apply battery voltage and ground to terminals No. 2 and 4. Continuity should now be present between terminals No. 1 and 3. If continuity is not present, replace relay.
scientia non olet · About LEMON Manuals