Removal & Installation
WARNING: This page is about the Prelude Automatic Trans, which is a different variant/trim than selected.
Includes: R&I Torque Converter.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 5.1 | C | |||
| Combination Procedure: DRIVE PLATE: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: GOVERNOR: Remove & Replace: | ||||
| 0.8 | A | |||
| Combination Procedure: MAIN CONTROL VALVE BODY: Overhaul: | ||||
| 1.6 | A | |||
| Combination Procedure: MAIN CONTROL VALVE BODY: Remove & Replace: | ||||
| 0.9 | B | |||
| Combination Procedure: MAINSHAFT OIL SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: PARKING PAWL: Remove & Replace: | ||||
| 0.9 | A | |||
| Combination Procedure: REVERSE FORK: Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: SHIFT ARM &/OR SEAL: Remove & Replace: | ||||
| 0.5 | B | |||
| Combination Procedure: TORQUE CONVERTER: Overhaul: | ||||
| 1.0 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.6 | C | |||