LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1985 >> Prelude Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Spark Control System >> Component Testing >> THERMOSENSOR
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing: THERMOSENSOR

  1. Ensure engine coolant temperature is below 104°F (40°C). Disconnect connector at control unit. Check for resistance between Blue/Yellow and Brown/Black terminals. Resistance should be above 1000 ohms.
  2. Run engine until cooling fan comes on and check resistance again. Resistance should be about 200 ohms. If resistance is outside ranges, replace thermosensor and retest. If ohmmeter shows no continuity, check wires. If there are no defects, replace thermosensor and retest.
scientia non olet · About LEMON Manuals