TDC/CKP/CYP Sensor
- Turn ignition off. Unplug TDC/CKP/CYP sensor connector, located at distributor. Check resistance between terminals "B" and "F", terminals "C" and "G" and terminals "D" and "H". See Fig 1
. If resistance is 700-1300 ohms (350-700 ohms for Accord F22B2 engine and Odyssey) for each pair, go to next step. If any of resistance is not as specified, replace distributor.
- Check for continuity between each distributor terminal and chassis ground. If continuity exists at any terminal, replace distributor.
Courtesy of AMERICAN HONDA MOTOR CO., INC.