Low Fuel Indicator Test
- Do the fuel gauge sending unit test (see
FUEL GAUGE SENDING UNIT TEST
).
- If the system is OK, go to step 2.
- If the system has a malfunction, replace the fuel gauge sending unit.
- Turn the ignition switch ON (II) with the float at the E (EMPTY) position.
- If the low fuel indicator is on, go to step 3.
- If the low fuel indicator is not on, refer to the Gauges Circuit Diagram (see CIRCUIT DIAGRAM
), and check the circuit.
- Lift the float above the LOW position.
- If the low fuel indicator goes off, the system is OK.
- If the low fuel indicator is still on, refer to the Gauges Circuit Diagram (see CIRCUIT DIAGRAM
), and check the circuit.