Transmission Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Prelude Base, Automatic, which is a different variant/trim than selected.
Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| w/ATTS | 10.3 | A | ||
| w/o ATTS | 7.8 | A | ||
| Additional Procedure: TRANSMISSION ASSEMBLY: Remove, Install, and Overhaul: | ||||
| Where Air Pump interferes add | 0.4 | A | ||
| Where Cruise Control interferes add | 0.3 | A | ||
| Where Pwr Strg interferes add | 0.3 | A | ||
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 0.8 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: DIFFERENTIAL ASSEMBLY: Overhaul: | ||||
| 1.5 | A | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| 2.0 | A | |||