Low Fuel Indicator Test
- Do the fuel gauge sending unit test (see INSTALLATION
).
- If the system is OK, go to step 2.
- If the system has any malfunction, repair it.
- Turn the ignition switch ON (II) with the float at E (EMPTY) position.
- If the low fuel indicator is on, go to step 3.
- If the low fuel indicator is not on, refer to the low fuel indicator Circuit Diagram, 2000-2003 models (see
CIRCUIT DIAGRAM
), 2004-2005 models (see
CIRCUIT DIAGRAM
), and check the circuit.
- Lift the float above LOW position.
- If the low fuel indicator goes off, the system is OK.
- If the low fuel indicator is still on, refer to the low fuel indicator Circuit Diagram, 2000-2003 models (see
CIRCUIT DIAGRAM
), 2004-2005 models (see
CIRCUIT DIAGRAM
), and check the circuit.