Starter Switch Signal: Accord
- Place transmission in Neutral or Park position (A/T) or depress clutch pedal (M/T). Turn ignition switch to START position. Backprobing, measure voltage between PCM connector "A" (32-pin connector) terminal No. 24 (Blue/Orange wire) and PCM connector "B" (25-pin connector) terminal No. 20 (Brown/Black wire). See Figure and Figure . If battery voltage does not exist, go to next step. If battery voltage exists, problem is intermittent. Starter switch signal is okay at this time.
- Inspect No. 13 (7.5-amp) fuse in driver's underdash fuse/relay box located behind left kick panel. See STARTER SIGNAL FUSE IDENTIFICATION table. If fuse is okay, repair open in Blue/Orange wire between driver's underdash fuse/relay box and PCM connectors. If fuse is not okay, repair short in Blue/Orange wire between driver's underdash fuse/relay box, PCM and PGM-FI main relay connectors. See WIRING DIAGRAMS article. Replace fuse.