Starter Switch Signal: S2000
- Depress clutch pedal. Turn ignition switch to START position. Backprobing, measure voltage between PCM connector "A" (32-pin connector) terminal No. 24 (Blue/Orange wire) and PCM connector "B" (25-pin connector) terminal No. 20 (Brown/Yellow wire). See Figure and Figure . If battery voltage does not exist, go to next step. If battery voltage exists, problem is intermittent. Starter switch signal is okay at this time.
- Inspect No. 21 (7.5-amp) fuse in underdash fuse/relay box. See STARTER SIGNAL FUSE IDENTIFICATION table. If fuse is okay, repair open in Blue/Orange wire between No. 21 (7.5-amp) fuse in underdash fuse/relay box and PCM connectors. If fuse is not okay, repair short in Blue/Orange wire between No. 21 (7.5-amp) fuse in underdash fuse/relay box or PGM-FI main relay connectors. See WIRING DIAGRAMS article. Replace No. 21 (7.5-amp) fuse.
STARTER SIGNAL FUSE IDENTIFICATION
| Model | Fuse No. | Fuse Name | Amperage | Location |
|---|---|---|---|---|
| Accord & Odyssey | No. 13 | STARTER SIGNAL | 7.5-Amp | Driver's Underdash Fuse/Relay Box |
| CR-V | No. 31 | STARTER SIGNAL | 7.5-Amp | Underdash Fuse/Relay Box |
| Insight | No. 9 | STARTER SIGNAL | 7.5-Amp | Underdash Fuse/Relay Box |
| Prelude | No. 2 | STARTER SIGNAL | 7.5-Amp | Underdash Fuse/Relay Box |
| S2000 | No. 21 | STARTER SIGNAL | 7.5-Amp | Underdash Fuse/Relay Box |