Memorizing a Seat Position
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Move the seat to the desired position. Turn the ignition switch ON (II).
Press and hold the MEMO button on the driver's position memory switch. A single beep will be heard and both of the green LEDS will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat positions have been memorized. The LED will remain lit, unless the seat is moved from the memorized position.