DTC P1607: PCM Internal Circuit Malfunction
- Reset the PCM (see HOW TO RESET THE PCM ).
- Turn the ignition switch ON (II).
- Wait 30 seconds.
Is DTC P1607 indicated?
- YES -Substitute a known-good PCM and recheck (see HOW TO SUBSTITUTE THE PCM FOR TESTING ). If the symptom/indication goes away, replace the original PCM.
- NO -Go to step 4.
- Turn the ignition switch OFF.
- Turn the ignition switch ON (II).
- Wait 10 seconds.
Is DTC P1607 indicated?
- YES -Substitute a known-good PCM and recheck (see HOW TO SUBSTITUTE THE PCM FOR TESTING ). If the symptom/indication goes away, replace the original PCM.
- NO -Intermittent failure, system is OK at this time. A low battery can cause this problem. Ask the customer if the engine had to be jump-started recently.