PCM Reset Procedures

Clear A/T DTCs, and PCM Reset Procedures
1. Connect the HDS to the DLC.
2. Turn the ignition switch ON (II).
3. Clear the DTC(s) on the HDS screen.

OBD Status
The OBD Status shows the current system status of each DTC and all of the parameters. This function is used to see if the technician's repair was successfully finished. The results of diagnostic tests for the DTC are displayed as:
^ PASS: On Board Diagnosis is successfully finished.
^ FAILED: On Board Diagnosis has finished but failed.
^ NOT COMPLETED: The On Board diagnosis was running but is out of the Enable conditions of the DTC.