2000-2005 M/T models
- Relieve the fuel pressure; 2000-2003 models (see
2000-2003 MODELS
), 2004-2005 models (see
2004-2005 MODELS
).
- Disconnect the vacuum hose and fuel return hose.
- Remove the two 6 mm retainer bolts (A) and the fuel pressure regulator (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Apply clean engine oil to a new O-ring (C), and carefully install it into its proper position.
- Install the fuel pressure regulator and the 6 mm retainer bolts.
- Reconnect the vacuum hose and fuel return hose.
- Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for about 2 seconds, the fuel pressure in the fuel line rises. Repeat this two or three times, then check for fuel leakage.