LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2004 >> Pilot EX >> Repair and Diagnosis >> Engine Performance >> System >> Fuel & Emissions System >> How To Set Readiness Codes >> Catalytic Converter Monitor & Readiness Code >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Catalytic Converter Monitor & Readiness Code: Procedure

  1. Connect the HDS or the scan tool to the vehicle's data link connector (DLC), and bring up the READINESS CODES for the catalyst in the DTCs menu.
  2. Start the engine.
  3. Test-drive the vehicle under stop-and-go conditions with short periods of steady cruise. After about 5 miles (8 km), the readiness code should switch from incomplete to complete.
  4. If the readiness code is still set to incomplete, check for a temporary DTC. If there is no DTC, one or more of the enable criteria were probably not met; repeat the procedure.
scientia non olet · About LEMON Manuals