DTC P2108: Throttle Actuator Control CPU Problem
- Turn the ignition switch ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch OFF.
- Turn the ignition switch ON (II).
- Check for Temporary DTCs or DTCs with the HDS.
Is DTC P2108 indicated?
YES - Substitute a known-good PCM (see HOW TO SUBSTITUTE THE PCM ), and recheck. If DTC P2108 is not indicated, replace the original PCM (see PCM REPLACEMENT ).
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the throttle body and at the PCM.