LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2006 >> Insight Standard >> Repair and Diagnosis >> Engine Performance >> System >> Advanced Diagnostics >> DTC P0A82 (63): Battery Module Overheating >> Driving Pattern
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driving Pattern

When the HDS is used:

  1. Connect the HDS, and start the engine.
  2. Remove the IPU lid.
  3. Request the battery module fan drive on the HDS.
  4. Verify that the battery module fan is actually running.

When the HDS is not used:

  1. Remove the IPU lid.
  2. Reset the BCM. (Disconnect the 12 V battery terminal once and reconnect it.)
  3. Remove the No. 15 EPS (40 A) fuse from the under-hood fuse/relay box.
  4. Hold the engine at a speed between 3,500 - 4,000 rpm without load (in Park or neutral), and wait until 19 segments of the indicator on the IMA battery charge gauge are indicated.
  5. Turn off the ignition switch.
  6. Repeat steps  2 -  5 five times. (Increase the battery module temperature.)
  7. Verify that the battery module fan drive is running when the engine is idling.
  8. Reinstall the No. 15 EPS (40 A) fuse and IPU lid.
scientia non olet · About LEMON Manuals