DTC P1430 (40): Motor Drive Module (MDM) Short Circuit Sensor Problem: General Description
If the flag short circuit (FSC) signals from the motor power inverter (MPI) module do not vary from a low voltage level to a high voltage level within a set time after turning the ignition switch on, a malfunction is detected. The signals vary from a low voltage level to a high voltage level within a set time (t0) under normal conditions. If a problem occurs in the signal circuit, the signals stay at a low voltage level for a set time (t1) (t1>t0) after turning the ignition switch on, and the motor control module (MCM) detects a malfunction and stores a DTC.
MONITOR DESCRIPTION CHART
| Execution | Once per driving cycle |
| Sequence | None |
| Duration | 0.5 seconds or more |
| DTC Type | One drive cycle, MIL ON, IMA system indicator ON |
ENABLE CONDITIONS CHART
| Condition | Minimum | Maximum |
|---|---|---|
| MCM power-supply voltage | 10.5 V | - |
| Ignition switch | ON | |