Transaxle Assembly: Reseal
WARNING: This page is about the Element EX, 2.4 YH1, Automatic, which is a different variant/trim than selected.
Includes: R&I Transaxle Assembly, replace all Gaskets and/or Seals.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| FWD | 7.2 | B | ||
| Additional Procedure: TRANSAXLE ASSEMBLY: Reseal: | ||||
| Where Pwr Strg interferes add | 0.3 | B | ||
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 0.8 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Reseal: | ||||
| 1.5 | B | |||