Passenger's Power Window Switch Test/Replacement
- Remove the passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION
).
- Disconnect the 5P connector (A) from the front passenger's power window switch (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the two screws and the passenger's power window switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the terminals in each switch position according to the table below.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- If the continuity is not as specified, replace the switch.