Power Window Master Switch Test/Replacement

Remove the switch panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 20P connector from the power window master switch.

Fig 1: Identifying Power Window Master Switch 20P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the tables.
Driver's Switch:

The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, do POWER WINDOW MASTER SWITCH INPUT TEST . If the tests are normal, the driver's switch must be faulty.

NOTE: RESETTING THE POWER WINDOW CONTROL UNIT if you disconnect the switch or replace it.

Front Passenger's Switch

Fig 2: Identifying Front Passenger's Switch Terminals Continuity Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, remove the three screws and replace the switch (A).

Fig 3: Identifying Power Window Master Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.