Fuel Tank Unit Removal/Installation: Removal

Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
Remove the fuel fill cap.
Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
Fold back the floor mat until the access panel is accessible. Remove the access panel (A) from the floor.

Fig 1: Identifying Access Panel & Floor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel tank unit 5P connector (B).
Disconnect the quick-connect fitting (C) from the fuel tank unit.
Using the special tool, loosen the lock-nut (A).

Fig 2: Identifying Special Tool & Lock-nut
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the lock-nut (A) and the fuel tank unit (B).

Fig 3: Identifying Lock-Nut & Fuel Tank Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.