Motor Test

Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the driver's window motor.

Fig 1: Identifying Driver's Window Motor 6P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor in each direction by connecting battery power and ground according to Fig 2.
NOTE: To prevent damage to the motor, disconnect one lead as soon as the motor stops running.

Fig 2: Connecting Battery Power And Ground Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.