LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Coil Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Removal/Installation

  1. Remove the MAP sensor connector (A), then remove the harness holder (B) from the brackets.
    Fig 1: Identifying MAP Sensor Connector And Harness Holder
    G05454035Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the ignition coil connector, then remove the ignition coils.
    Fig 2: Ignition Coils With Torque Specification
    G05454036Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the ignition coils in the reverse order of removal.
scientia non olet · About LEMON Manuals