LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EVAP System >> EVAP Canister Vent Shut Valve Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Canister Vent Shut Valve Replacement

  1. Remove the EVAP canister (see EVAP CANISTER REPLACEMENT ).
  2. Remove the hose (A), and disconnect EVAP canister vent shut valve connector (B).
    Fig 1: EVAP Canister Vent Shut Valve Parts Location With Torque Specification
    G05454904Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the EVAP canister vent shut valve (C) from the canister bracket (D).
  4. Pry the lock tabs (E) outward and remove the EVAP canister vent shut valve.
    NOTE: Be careful not to damage the lock tabs.
  5. Install the parts in the reverse order of removal with a new O-ring (F).
    NOTE: Do not coat the O-ring with oil.
scientia non olet · About LEMON Manuals