LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Output Shaft (Countershaft) Speed Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft (Countershaft) Speed Sensor Replacement

  1. Remove the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
  2. Disconnect the output shaft (countershaft) speed sensor connector (A).
    Fig 1: Output Shaft (Countershaft) Speed Sensor Connector And O-Rings With Torque Specification
    G05455322
  3. Remove the output shaft (countershaft) speed sensor (B).
  4. Install the new O-ring (C) on the new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor in the transmission housing.
  5. Check the connector for rust, dirt, or oil, then connect the connector securely.
  6. Install the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals