LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Alternator Removal and Installation: Installation

  1. Install the alternator, then loosely install the lock bolt (A) and the mounting bolt (B).
    Fig 1: Lock Bolt And Mounting Bolt With Torque Specifications
    G05454062Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the drive belt (see DRIVE BELT REPLACEMENT ).
  3. Adjust the drive belt tension (see DRIVE BELT INSPECTION AND ADJUSTMENT ).
  4. Connect the alternator connector (A) and the BLK wire (B) by aligning the tab on the terminal (C) and the groove (D) of the terminal insulator, then install the harness clamp (E).
    Fig 2: Alternator Connector, BLK Wire, Terminal, Groove And Harness Clamp With Torque Specification
    G05454063Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the intake manifold (see INSTALLATION ).
  6. Connect the negative cable to the battery.
  7. Enter the anti-theft code for the audio system.
  8. Set the clock.
scientia non olet · About LEMON Manuals