Wiper and Washer Systems: Service and Repair

Washer Motor Test/Replacement

1. Remove the right front inner fender.




2. Disconnect the 2P connector (A) from the washer motor (B).
3. Test the motor by connecting battery power to the No. 1 (No. 2) terminal and ground the No. 2 (No. 1) terminal of the washer motor. The motor should run.
( ) Rear window washer direction.
- If the motor does not run or fails to run smoothly, replace it.
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.