Back Power Window Motor Test

Remove the rear panel trim (see REAR PANEL INSULATOR REPLACEMENT ).
Disconnect the 6P connector (A) from the back window motor.

Fig 1: Identifying Back Power Window Motor 6P Connector Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately.

Fig 2: Testing Window Motor By Connecting Battery Power And Ground As Shown
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.