Camshaft Bearing Cap
Put the camshaft holders on the cylinder head, then tighten all bolts to 22 Nm (2.2 kgf-m, 16 ft. lbs.). To prevent damaging the camshafts, tighten the bolts two turns at a time, in the sequence shown.
Put the camshaft holders on the cylinder head, then tighten all bolts to 22 Nm (2.2 kgf-m, 16 ft. lbs.). To prevent damaging the camshafts, tighten the bolts two turns at a time, in the sequence shown.