LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2008 >> S2000 Base >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 1 Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECT Sensor 1 Replacement

  1. Drain the engine coolant (see COOLANT REPLACEMENT ).
  2. Disconnect the ECT sensor 1 2P connector (A).
    Fig 1: ECT Sensor 1 2P Connector With Torque Specifications
    G06231772Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove ECT sensor 1 (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
  5. Refill the radiator with engine coolant (see COOLANT REPLACEMENT ).
scientia non olet · About LEMON Manuals