Power Seat Adjustment Switch Test/Replacement
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
SRS Components are located in this area. Review the SRS component locations (see
COMPONENT LOCATION INDEX
), and precautions and procedures (see
PRECAUTIONS AND PROCEDURES
) before doing repairs or servicing.
- Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
- Remove the power seat adjustment switch knobs (A) from the power seat adjustment switch (B).
- Remove the driver's seat front cover (see FRONT SEAT CUSHION COVER REPLACEMENT ) and recline cover (see FRONT SEAT RECLINE COVER REMOVAL/INSTALLATION ).
- Disconnect the 12P connector from the switch, then remove the two screws.
- Reinstall the adjustment switch knobs to the switch.
- Check for continuity between the terminals in each position according to the table.
- If the continuity is not as specified, replace the switch.
- Install the part in the reverse order or removal.