Power Seat Adjustment Switch Test/Replacement
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
SRS components are located in this area. Review the SRS component locations (see
COMPONENT LOCATION INDEX
) and precautions and procedures (see
PRECAUTIONS AND PROCEDURES
) before doing repairs or servicing.
- Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
- Remove the power seat adjustment switch knobs (A) and the recline cover from the driver's seat (see FRONT SEAT RECLINE COVER REMOVAL/INSTALLATION ), then remove the two screws and the power seat adjustment switch (B).
- Disconnect the 12P connector from the power seat adjustment switch.
- Reinstall the adjustment switch knobs to the switch.
- Check for continuity between the terminals in each position according to the table.
- If the continuity is not as specified, replace the switch.
- Install the switch in the reverse order of removal.