Enable Conditions
ENABLE CONDITIONS
| Condition | Minimum | Maximum | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Elapsed time after monitor finishing condition except immediate starting the engine | 1 second | - | |||||||
| Engine coolant temperature | None, unless the initial engine coolant temperature (ECT) is 14°F (-10°C) or less, in which case the monitor will not run until the ECT reaches 68°F (20°C) | ||||||||
| Engine speed | 480 rpm(2) 500 rpm(3) |
6,800 rpm | |||||||
| MAP value(1) | 700 rpm | 28 kPa (8.2 in.Hg, 208 mmHg)(2) 26 kPa (7.5 in.Hg, 173 mmHg)(3) |
- | ||||||
| 2,500 rpm | 24 kPa (6.9 in.Hg, 173 mmHg)(2) 21 kPa (6.2 in.Hg, 155 mmHg)(3) |
- | |||||||
| Fuel feedback | Other than during fuel cut-off operation | ||||||||
| No active DTCs | P0107, P0108, P0117, P0118, P0122, P0123, P0222, P0223, P0335, P0339, P1109, P1128, P1129, P2227, P2228, P2229 | ||||||||
| Other | Test-drive on a flat road to avoid misdetection | ||||||||
|
|||||||||