Power Mirror Replacement

Power Mirror Replacement

NOTE: Take care not to scratch the door.

1. Lower the door glass fully.

2. Carefully pull out the mirror mount cover (A) to detach the clip, and lift the cover to release the hooks (B), then remove the cover.






3. Disconnect the connector (A).





4. While holding the mirror, remove the nuts securing the mirror.

5. Release the hook (A), then remove the mirror (B).





6. Install the mirror in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Make sure the connector is plugged in properly.
- Make sure the power mirror operate properly.
- Push the clip and the hooks into place securely.