Tightening Torque and Sequence

Torque the cylinder head bolts in sequence to 39 Nm (4.0 kg-m, 29 lb-ft)






After torquing, tighten all cylinder head bolts in two steps (90 ° per step)

If you are using a new cylinder head bolt
Tighten the bolt an extra 90 °.




Camshaft Bearing Cap

Tighten the bolts in the specified sequence.

NOTE: If the engine does not have bolt (21), skip it and continue the tighten sequence.










Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear/Sprocket Specifications