LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2011 >> Fit Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Advanced Diagnostics >> DTC P0300: Random Misfire Detected >> Enable Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enable Conditions

Condition Minimum Maximum
Elapsed time after monitor finishing condition except immediate starting the engine 1.0 second -
Engine coolant temperature None, unless the initial engine coolant temperature is 14 °F (-10 °C) or less, in which case the monitor will not run until the engine coolant temperature reaches 68 °F (20 °C)
Engine speed 480 rpm(2)
500 rpm(3)
6,800 rpm
MAP value(1) 700 rpm 28 kPa (8.2 inHg, 208 mmHg)(2)
26 kPa (7.5 inHg, 189 mmHg)(3)
-
2,500 rpm 24 kPa (6.9 inHg, 173 mmHg)(2)
21 kPa (6.2 inHg, 155 mmHg)(3)
-
Fuel feedback Other than during fuel cut-off operation
No active DTCs set (prevents monitor from running) P0107, P0108, P0117, P0118, P0122, P0123, P0222, P0223, P0335, P0339, P1109, P1128, P1129, P2227, P2228, P2229
Other Test-drive on a flat road to avoid misdetection
(1) Varies with driving conditions.
(2) A/T model
(3) M/T model