Hatch Release Actuator Test

Open the hatch.
Remove the hatch lower trim panel (see TRIM REMOVAL/INSTALLATION - HATCH AREAS ).
Disconnect the 2P connector (A) from the hatch release actuator (B).

Fig 1: Identifying 2P Connector And Hatch Release Actuator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

Fig 2: Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the actuator does not operate as specified, replace the hatch latch assembly (see HATCH LATCH REPLACEMENT ).