Fuel Pump/Fuel Gauge Sending Unit Replacement
- Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL AND INSTALLATION
).
- Remove the fuel level sensor (fuel sending unit) (A) from the fuel tank unit (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check these items before installing the fuel tank unit:
- When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place.
- When installing the fuel gauge sending unit, make sure the connection is secure. Be careful not to bend or twist it excessively.
- Install the parts in the reverse order of removal. When installing the fuel tank unit, align the marks on the unit and the fuel tank (see INSTALLATION
).