VSA Modulator-Control Unit Removal and Installation: Removal

Turn the ignition switch to LOCK (0).
Disconnect the 10 mm brake lines (A) and the 12 mm brake lines (B) from the VSA modulator-control unit (C).

Fig 1: Identifying Brake Lines And VSA Modulator-Control Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the VSA modulator-control unit 32P connector (A) by pushing the lock (B) and pulling down the lever (C); the connector disconnects itself.

Fig 2: Disconnecting VSA Modulator-Control Unit 32P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the VSA modulator-control unit (A) with the bracket (B) from the body.

Fig 3: Identifying VSA Modulator-Control Unit, Bracket And Wire Harness Clip
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the wire harness clip (C) from the bracket.
Remove the VSA modulator-control unit (A) from the bracket (B).

Fig 4: Identifying VSA Modulator-Control Unit And Bracket
Courtesy of AMERICAN HONDA MOTOR CO., INC.