LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 1 Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECT Sensor 1 Replacement

  1. Remove the air cleaner (see AIR CLEANER ELEMENT INSPECTION/REPLACEMENT ).
  2. Remove the bolt (A).
    Fig 1: ECT Sensor 1 Connector, Bolt And O-Ring With Torque Specifications
    G06949924Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the ECT sensor 1 connector (B).
  4. Remove ECT sensor 1 (C).
  5. Install the parts in the reverse order of removal with a new O-ring (D), then refill the radiator with engine coolant (see COOLANT REPLACEMENT ).
scientia non olet · About LEMON Manuals