DTC 26-11: Lateral Acceleration Sensor Internal Circuit Malfunction
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- While doing this troubleshooting, avoid vibration or shaking of the vehicle.
- Park the vehicle on a flat and level surface.
- Turn the ignition switch to ON (II).
- Clear the DTC with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Wait for 60 seconds or more.
- Check for DTCs with the HDS.
Is DTC 26-11 indicated?
YES -Replace the yaw rate-lateral acceleration sensor (see YAW RATE-LATERAL ACCELERATION SENSOR REPLACEMENT ).
NO -Intermittent failure, the system is OK at this time. Refer to INTERMITTENT FAILURES TROUBLESHOOTING