LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Mode 6 - 2012 HONDA >> Mode $06 Information By Test >> EVAP System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP System

DTC P0455: Monitor ID $3A: Test ID $BA

OBD Monitor ID $3A Test ID $BA Unit and Scaling ID $12
DTC P0455
Test Description Large (gross) leak check of EVAP system by monitoring time of the fuel tank pressure sensor value which is equal atmosphere after the engine off. (EONV)
Store Timing Failure judgment
Conversion to Engineering Units Measured value: Output value (Decimal) x 1.0 (sec.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 1.0 (sec.)
DTC P0456: Monitor ID $3C: Test ID $B4

OBD Monitor ID $3C Test ID $B4 Unit and Scaling ID $06
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value after the engine off. (EONV)
Store Timing Normal judgment/Failure judgment
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.0000305
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.0000305
DTC P0456: Monitor ID $3C: Test ID $B5

OBD Monitor ID $3C Test ID $B5 Unit and Scaling ID $83
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value after the engine off. (EONV)
Store Timing Normal judgment/Failure judgment
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.01
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.01
DTC P0456: Monitor ID $3C: Test ID $B6

OBD Monitor ID $3C Test ID $B6 Unit and Scaling ID $12
DTC P0456
Test Description Leak check of EVAP system by monitoring time of the fuel tank pressure sensor value which is equal atmosphere after the engine off. (EONV)
Store Timing Failure judgment
Conversion to Engineering Units Measured value: Output value (Decimal) x 1.0 (sec.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 1.0 (sec.)
DTC P0457, P0496, P145C: Monitor ID $3D: Test ID $B9

OBD Monitor ID $3D Test ID $B9 Unit and Scaling ID $30
DTC P0457, P0496, P145C
Test Description Purge flow and/or EVAP canister purge valve check by monitoring fuel tank pressure sensor value while the engine is running.
Store Timing Normal judgment/Failure judgment
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.001526 (%)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.001526 (%)