LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Electronic Throttle Control System >> Accelerator Pedal Module Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Module Removal/Installation

  1. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Disconnect the APP sensor connector (A).
    Fig 1: APP Sensor Connector & Accelerator Pedal Module With Torque Specifications
    G05953085Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals